Remote Starter

Remote Starter

Postby TrevorGTP » Sun Feb 10, 2013 11:07 pm

Anyone ever done this before? Anyone link me to some write-ups would be nice... thanks
Tuned, 3.4 MPS, SD heatwrapped headers, ZZP stainless cat back 2.5, 3 inch downpipe catted, F- Body brake kit Cross Drilled and Slotted rotors, 160 T stat, 104's, Prosport Boost Gauge and Aeroforce.
TrevorGTP
Registered
 
Posts: 325
Joined: Thu Apr 02, 2009 10:45 pm
Location: Manchester, NH

Re: Remote Starter

Postby Snaoum » Mon Feb 11, 2013 8:39 am

I've done them on many cars. The GP is simple. You can find the wiring diagram below.

http://www.bulldogsecurity.com/bdnew/ve ... agrams.asp

You will need a bypass, PK3. See link below.

http://ifar.ca/en/vehicles/pontiac/grand_prix/


I do not have any write ups but I will tell you that everything you need is under the drivers side dash/kick panel. Are you looking to do just remote start or keyless entry as well?

Again the GP is a easy car to do, if it is your first time I would put aside maybe 4 hours.
S1X cam-S&S headers-S3 SC- ported LIM-3.6/3.4/3.25 mps-CAI-180 t-stat-N*-GMPP handling kit-12"brakes-SLP GTX hood-SLP gen1 spoiler-Tune.

Image
Snaoum
Registered
 
Posts: 231
Joined: Mon Aug 13, 2007 9:54 pm
Location: Framingham, MA

Re: Remote Starter

Postby Andrew » Mon Feb 11, 2013 4:22 pm

Did I hear right somewhere I heard that you can plug one in line with your OBD port and its basically a plug and play remote starter.
12.100 @ 109.31
Stage 3 heads & Cam, TOG Headers, S2 Inter-cooled, GenV Blower, N* Throttle Body, 60lb Injectors
Andrew
Site Admin
 
Posts: 4020
Joined: Mon May 14, 2007 12:20 am
Location: Atkinson, NH


Return to Grand Prix

Who is online

Users browsing this forum: No registered users and 1 guest

cron