Belt Sizes

Belt Sizes

Postby Andrew » Mon May 19, 2008 4:37 pm

Stolen form ClubGP

Part Number Examples
Napa/Gates: 060XXX
Goodyear: 4060XXX
Dayco: 5060XXX
Duralast: XXXK6


No IC
Grand Prix
3.8 (Stock): 665
3.2-3.5: 660
2.85-3.1: 650
2.7-2.85: 642

Bonneville
Stock: 721
3.4: 716


With ZZP Stage 2 IC (2.25” tall Core)
6 Rib
3.3-3.8: 685
2.7-3.2: 680 (Note that the NAPA 680 may be too long for 2.8" and smaller. Try a NAPA 672)
2.5-2.6: 672

8 Rib NOTE: For these belts the part numbers are 080 rather than 060...or K8 with the Duralast rather than K6.
3.0-3.2: 685
2.6-2.9: 680

Gen 5 Blower
2.9-3.1: 685
2.7-3.0: 680
2.4-2.6: 675


With ZZP Stage 3 IC (??? tall Core)
6 Rib:
3.1-3.8: 685
2.6-3.0: 680

Gen 5 Blower
3.0-3.8: 685
2.6-2.9: 680
2.3-2.55: 675

Gen 5 Blower with ATI 10% overdrive balancer
2.8: 695

With ZZP SSIC (1” tall Core)
3.2-3.8: 670
3.0-3.1: 667 (Stock belt)
2.8: 660


With MAP IC (2.0” tall Core)
3.1-3.4: 680
2.8-3.0: 672


With WBS IC (1.91” tall Core)
No information currently. MAP IC belt reference would be close but the belts listed there will be a bit long for some applications with the WBS IC.

With Thrasher IC (2.5” tall Core)
2.8: 672
3.0: 680

ZZP SS M90 Conversion
k060970 - SS M90 for 97/98
K060950 - SS M90 for 99+


Other Belts

060915 - Stock accessory belt for 99-03
-also works with either UD WP pulley or OD alt pulley but not both.

060905 - Stock Accessory belt for 04+



060923 - Accessory belt for 99+ with UD WP pulley and alt UD pulley.

4060935 - Stock accessory belt for 97/98 (94").

4060938 - Accessory belt for 97/98 with underdrive pulleys.


Metal Pulley Diagram:
12.100 @ 109.31
Stage 3 heads & Cam, TOG Headers, S2 Inter-cooled, GenV Blower, N* Throttle Body, 60lb Injectors
Andrew
Site Admin
 
Posts: 4020
Joined: Mon May 14, 2007 12:20 am
Location: Atkinson, NH

Postby crab daddy » Mon May 19, 2008 4:55 pm

I ran a 675 with a 2.8 pulley and a 670 with the 2.6 (zzp s2 ic)

I found it to be too sloppy with the bigger belts that were suggested. They worked fine when you first put them on but once you run them a little they seem to stretch out.

I run my belts tight as fuck though. which is how I got away with a 6 rib setup and no slip issues with a 2.6 pulley.
12.466 @ 114.15 INTENSE S1X/ZZP IC/TOG HeadersImage
Image
2006 Nissan Titan 4x4/ 2011 Nissan Altima coupe
1972 Harley Davidson XLCH 1000 Sportster
crab daddy
Registered
 
Posts: 2053
Joined: Wed May 16, 2007 9:26 pm
Location: Attleboro, MA

Postby John » Wed May 21, 2008 1:10 pm

Where would an Intense IC sit in there?
John
Site Admin
 
Posts: 842
Joined: Mon May 14, 2007 12:16 am
Location: Calera, Alabama

Postby deekster_caddy » Wed May 21, 2008 2:33 pm

Should be the same as any other core of the same thickness. How thick is the IC?
'98 Buick Riviera; Gen V 3.2 pulley, N*, VS Cam, 180 stat, Custom PCM (Powrtuner), headers & HF cat , 42.5 lb inj.
Grant-built/PRJ/Thrasher trans 3.29 gears, 7/8 chain, zzp hardened IS
13.8@101 ET
Image
deekster_caddy
Registered
 
Posts: 3160
Joined: Sun May 20, 2007 10:29 pm
Location: Reading, MA

Postby crab daddy » Wed May 21, 2008 2:47 pm

M90 with 1.91" thick intercooler - W-body:

GB6-680 - 6-rib, 2.90" - 3.00"
GB6-672 - 6-rib, 2.60" - 2.80"


GB8-680 - 8-rib, 2.90" - 3.00" (+$14.00)
GB8-675 - 8-rib, 2.60" - 2.80" (+$14.00)


M90 with 1.91" thick intercooler - G or H-body:

GB6-710 - 6-rib, 2.60" - 2.80"


wbody and intense have the same size core
12.466 @ 114.15 INTENSE S1X/ZZP IC/TOG HeadersImage
Image
2006 Nissan Titan 4x4/ 2011 Nissan Altima coupe
1972 Harley Davidson XLCH 1000 Sportster
crab daddy
Registered
 
Posts: 2053
Joined: Wed May 16, 2007 9:26 pm
Location: Attleboro, MA

Postby BillBoost37 » Sun Oct 12, 2008 7:44 pm

Homies..can we please update el sizes..

Bonne
Gen 3 or Gen 5
Stock
720

3.4-3.2
715

WBS 2" IC
3.0
725
Swiggles wrote:pics slow down the build process ....


Image
97 B'ville SSEi Gen V, S1X, 1.8RR's, N*, 3.29's w/LSD, .592" of lift happiness
BillBoost37
Registered
 
Posts: 3600
Joined: Sun Jul 01, 2007 3:33 pm
Location: Enfield CT

Postby Swiggles » Wed Aug 12, 2009 11:17 am

Stage2 IC with larger idler pulley and 3.8 SC pulley - 705
ImageImage
Swiggles
Registered
 
Posts: 3727
Joined: Sat Mar 21, 2009 11:53 am
Location: Quincy, MA

Postby hitman92499 » Sun Apr 10, 2011 2:36 pm

Swiggles: stage 2 IC, 3.8 pulley, Gen 5, Bonneville brackets, 8 rib = 080735 belt
hitman92499
Registered
 
Posts: 379
Joined: Sun Aug 08, 2010 9:43 am
Location: Quincy, MA

Postby Swiggles » Sun Apr 10, 2011 4:30 pm

no thats on the 3.4 pulley. and its a 2 5/8" IC which is about a 1/4 in bigger than the stage 2 :D
ImageImage
Swiggles
Registered
 
Posts: 3727
Joined: Sat Mar 21, 2009 11:53 am
Location: Quincy, MA


Return to Grand Prix

Who is online

Users browsing this forum: No registered users and 1 guest

cron