MA GS owner new to the site

Introduce yourself here.

MA GS owner new to the site

Postby scottgs03 » Fri Mar 09, 2012 3:41 pm

Hey guys,

New to NE pontiac...I drive an 03 Regal GS with 131,000 miles on her. I am located in central MA. A few of the guys here know me already, but for those of you who dont, Ill share my setup...

L67 ( 131,000 miles )
stock bottom end
.045 cometic head gaskets
Intense Stage 3 Heads
Intense Stage 3 Blower Cam
ZZP 3/8 pushrods
Rollmaster Double Roller
Machined LIM
Stock Gen 3
WBS mps w/ 2.7"
WBS belt wrap
ZZP modified fuel rails
WBS full size I/C
60# injectors
Pacesetters
Northstar
LQ4 MAF
ZZP full 3 inch stainless exhaust w/ Magnaflow
Fuel Pump Rewire
AEM wideband

HPtuners


It has the original trans still in it! ( **knock on wood ** does not slip, slam, hesitate etc ), however I am planning on going with a 3.69 built trans in a month or two.

I put 344 to the wheels with the setup above, I am guessing I lost about 20whp due to a fuel pressue issue and lifter issue at high rpm's.

I am shooting for 400+ in a couple of months, I dont think that should be too much of any issue with a few more upgrades... lookin forward to meeting some more locals still interested in the W-body!!
2003 Regal GS

344whp ( old setup... gen3, IS3 cam and heads )

t61 turbo, is3 heads and cam, built trans...

looking for 500+
scottgs03
Newbie
 
Posts: 7
Joined: Fri Mar 09, 2012 3:21 pm
Location: Central MA

Re: MA GS owner new to the site

Postby Swiggles » Fri Mar 09, 2012 4:35 pm

Bout you got on here lol

Welcome
ImageImage
Swiggles
Registered
 
Posts: 3727
Joined: Sat Mar 21, 2009 11:53 am
Location: Quincy, MA

Re: MA GS owner new to the site

Postby hitman92499 » Fri Mar 09, 2012 5:08 pm

Welcome to the site. Sounds well built. Bet it's a blast to drive, too.
1997 Grand Prix GT - The IncREDi-hoopdy - Top Swap - 3.8" Pulley - 180* T-stat - AL104's - GMPP F&R Sway Bars - 12" Front Brake Upgrade - 219000 miles and counting - GETRAG 284 5 Speed build in progress
hitman92499
Registered
 
Posts: 379
Joined: Sun Aug 08, 2010 9:43 am
Location: Quincy, MA

Re: MA GS owner new to the site

Postby deekster_caddy » Sat Mar 10, 2012 12:19 pm

Welcome! Nice build.
'98 Buick Riviera; Gen V 3.2 pulley, N*, VS Cam, 180 stat, Custom PCM (Powrtuner), headers & HF cat , 42.5 lb inj.
Grant-built/PRJ/Thrasher trans 3.29 gears, 7/8 chain, zzp hardened IS
13.8@101 ET
Image
deekster_caddy
Registered
 
Posts: 3160
Joined: Sun May 20, 2007 10:29 pm
Location: Reading, MA

Re: MA GS owner new to the site

Postby americansoldier » Sat Mar 10, 2012 12:37 pm

awesome setup, i think you would benefit greatly switching to a gen V blower, that would be my next step towards your 400 whp goal

any track times?
2003' GTP

Ported Blower
3.4 Pulley
1.95 Yella Terra Roller Rockers
LS6 Valve Springs/Pushrods
Powerlog/ 3" Downpipe/ Magnaflow Cat
Magnaflow Catback
K&N Intake
ESP Tune
UMI Trailing Arms
Nitto Drag Radials

13.8 @ 100 2.1 60 ft on Street tires
americansoldier
Registered
 
Posts: 1132
Joined: Fri Aug 15, 2008 6:07 pm
Location: Lawrence

Re: MA GS owner new to the site

Postby The Godfather » Sun Mar 11, 2012 5:16 pm

welcome aboard kid. I had some clown shoes muffin top beer for you the other night LOL
Image
The Godfather
Registered
 
Posts: 1656
Joined: Sat May 26, 2007 6:19 am
Location: MA

Re: MA GS owner new to the site

Postby scottgs03 » Tue Jun 19, 2012 10:56 am

Updates: ( new additions )


Ported Gen 3 w/2.7
wrapped headers
OE-R lifters
New valve retainers,locks, and seals

17x8 bullit wheels

Trans built by yours truly:

-4340 input
-3.29 sprockets
-7/8" chain
-chromoly pump shaft
-hardened 4th
-z pack 3rd
-thrasher shift kit
-raybestos clutches
-all new solenoids
-tcc relief kit
-3500 stall ( soon to be removed for a 2750 )


Image
Image
2003 Regal GS

344whp ( old setup... gen3, IS3 cam and heads )

t61 turbo, is3 heads and cam, built trans...

looking for 500+
scottgs03
Newbie
 
Posts: 7
Joined: Fri Mar 09, 2012 3:21 pm
Location: Central MA

Re: MA GS owner new to the site

Postby Swiggles » Tue Jun 19, 2012 11:58 am

Nice! Did you fix your sc issue?
ImageImage
Swiggles
Registered
 
Posts: 3727
Joined: Sat Mar 21, 2009 11:53 am
Location: Quincy, MA


Return to Introductions

Who is online

Users browsing this forum: No registered users and 1 guest

cron