Hi Everyone!

Introduce yourself here.

Hi Everyone!

Postby Morris04gtp » Tue Apr 27, 2010 1:53 pm

Hi everyone!! My name is Chris and I'm from Putnam CT, originally from RI. Anyone else local to this area? I've got a 2004 Grand prix GTP (strippy), bone stock at the moment. I've had it for a couple years now but all I've been able to do so far is hid's. The wife has been driving it for a while but now it's my turn.
Morris04gtp
Registered
 
Posts: 12
Joined: Tue Apr 27, 2010 12:47 pm
Location: Putnam, CT

Postby reveregtp » Tue Apr 27, 2010 1:54 pm

welcome!
Image
reveregtp
Registered
 
Posts: 3080
Joined: Fri Jun 01, 2007 10:20 pm
Location: revere, ma

Postby BillBoost37 » Tue Apr 27, 2010 1:58 pm

Whatever ya do, watch out for RevereGTP, he's a troublemaker...lol

Welcome!
Swiggles wrote:pics slow down the build process ....


Image
97 B'ville SSEi Gen V, S1X, 1.8RR's, N*, 3.29's w/LSD, .592" of lift happiness
BillBoost37
Registered
 
Posts: 3600
Joined: Sun Jul 01, 2007 3:33 pm
Location: Enfield CT

Postby Morris04gtp » Tue Apr 27, 2010 2:08 pm

I remember both of you from grandprixforums, haven't been very active on there but and starting to get back into the car so I'll be around a bit more.
Morris04gtp
Registered
 
Posts: 12
Joined: Tue Apr 27, 2010 12:47 pm
Location: Putnam, CT

Postby reveregtp » Tue Apr 27, 2010 2:27 pm

Morris04gtp wrote:I remember both of you from grandprixforums, .



we're famous bill :lol:
Image
reveregtp
Registered
 
Posts: 3080
Joined: Fri Jun 01, 2007 10:20 pm
Location: revere, ma

Postby Justin Dalio GTP » Tue Apr 27, 2010 3:04 pm

Welcome!
Image
13.732 @ 101.74mph
Old: 2001 Pontiac Grand Prix GTP

New: 2011 Infiniti G37x
Justin Dalio GTP
Registered
 
Posts: 3232
Joined: Wed May 16, 2007 11:19 pm
Location: Mendon, MA

Postby americansoldier » Tue Apr 27, 2010 4:12 pm

welcome to the site man..you got any pics of that bad boy? what are your plans for the car?
2003' GTP

Ported Blower
3.4 Pulley
1.95 Yella Terra Roller Rockers
LS6 Valve Springs/Pushrods
Powerlog/ 3" Downpipe/ Magnaflow Cat
Magnaflow Catback
K&N Intake
ESP Tune
UMI Trailing Arms
Nitto Drag Radials

13.8 @ 100 2.1 60 ft on Street tires
americansoldier
Registered
 
Posts: 1132
Joined: Fri Aug 15, 2008 6:07 pm
Location: Lawrence

Postby deekster_caddy » Tue Apr 27, 2010 4:14 pm

welcome!
'98 Buick Riviera; Gen V 3.2 pulley, N*, VS Cam, 180 stat, Custom PCM (Powrtuner), headers & HF cat , 42.5 lb inj.
Grant-built/PRJ/Thrasher trans 3.29 gears, 7/8 chain, zzp hardened IS
13.8@101 ET
Image
deekster_caddy
Registered
 
Posts: 3160
Joined: Sun May 20, 2007 10:29 pm
Location: Reading, MA

Postby Morris04gtp » Tue Apr 27, 2010 4:17 pm

americansoldier wrote:welcome to the site man..you got any pics of that bad boy? what are your plans for the car?


Yeah I got a couple of it but I'm at work and I'll have to upload them later. I'm gonna do a fwi soon, ngk t55's, other basic tune-up stuff (97k), in the long run I wanna do headers, down-pipe, short stack, port and polish the case, smaller pulley (don't know what size yet), I'd like to port and polish the heads, do 1.9 or 1.8 rockers, and a mild cam.
Morris04gtp
Registered
 
Posts: 12
Joined: Tue Apr 27, 2010 12:47 pm
Location: Putnam, CT

Postby bud659 » Tue Apr 27, 2010 4:24 pm

welcome. i got a 2004 GTP too.. nice car if i dont say so myself :lol:
2004 CompG headers, pulley, plugs, cai, RTA's, custom pcm
1998 Pontiac GrandPrix GTP rockers, headers, pulley, plugs, custom pcm, GMPP handling Kit
1988 Chevrolet Monte Carlo SS 350 GM Crate Motor, Alum Intake, Jet-Hot Hooker Headers, Hypertech chip, MSD 8.5 Ign Wires, Accel Ign Module,Cap+Rotor, Dynomax cat-back 2.5" exhaust, 3:73 Gears, 200-r4 tranny street/strip build
bud659
Registered
 
Posts: 752
Joined: Tue Jun 05, 2007 8:23 am
Location: Norwell

Postby murphinator » Tue Apr 27, 2010 10:37 pm

reveregtp wrote:
Morris04gtp wrote:I remember both of you from grandprixforums, .



we're famous bill :lol:


no your infamous :wink:

welcome Morris we have some fun on here :lol:
2000 Z28 M6, 11.95 @111 street tires through the exhaust, QTP long tubes 3" duals , slp lid & intake, spano/koni/hotchkis susp. etc..

99 z28 long tubes , catback ,lid

1998 Z28 built A4 3600 stall , slp lid & lower , ls6 intake ,80mm tb, Kooks long tubes , 3" ss catback , 3.73's 12.1 @112 oct/2013 11's coming up spring 14

2002GS 1/4 mi 13.165 108.09 trap ,1/8 mi 8.562 , 84.87 trap on spray , 13.5 @104 without

GTP ON SPRAY 12.209 @117.75 1/8 MI 7.73 @94



Image
murphinator
Registered
 
Posts: 2515
Joined: Fri Nov 02, 2007 3:47 pm
Location: Old Orchard Beach , Maine

Postby jlindahl2571 » Wed Apr 28, 2010 8:32 pm

Sounds like you have big plans for the car, good stuff.

x2 on pics.

Welcome!
Justin
Image
jlindahl2571
Registered
 
Posts: 256
Joined: Sat Dec 12, 2009 7:20 pm
Location: Woburn, MA

Postby Morris04gtp » Wed Apr 28, 2010 9:29 pm

here are a few, nothing much to look at.

Image
Image
Image
Morris04gtp
Registered
 
Posts: 12
Joined: Tue Apr 27, 2010 12:47 pm
Location: Putnam, CT

Postby Swiggles » Wed Apr 28, 2010 9:36 pm

welcome!

i love that color looks nice!!
ImageImage
Swiggles
Registered
 
Posts: 3727
Joined: Sat Mar 21, 2009 11:53 am
Location: Quincy, MA

Postby Morris04gtp » Wed Apr 28, 2010 9:39 pm

I can't wait to do the fwi and all the maint. stuff, I got on it today and it took forever to get up to 110 mph and it sounds like it's choking, the air filter is black and plugs are original, and for all I know so is the supercharger oil. Maybe next weekend I'll do the tr55's, 180* t-stat, supercharger oil and if I have the time the fwi, Wife and kids kill the modding time.
Morris04gtp
Registered
 
Posts: 12
Joined: Tue Apr 27, 2010 12:47 pm
Location: Putnam, CT

Next

Return to Introductions

Who is online

Users browsing this forum: No registered users and 1 guest

cron